Do Not Throw Your Soda Bottles: Make A Vertical Garden With Them

It’s decent to see individuals turn out to be more worried about their health, and plant their own particular natural products, veggies, herbs, and so on.

Be that as it may, we generally require some additional space in our garden, and a few of us are sufficiently fortunate to live in a little appartment. Things being what they are, what would we be able to do to change this?


We propose that you attempt our marvelous thought, and use all of your yard and garden. You should simply develop your plants vertically! Yes, you got that one right.

We’ll show you how to make your dribble flooding garden towers by using soda bottles. Along these lines you’ll have the capacity to develop your herbs, little veggies, and blossoms.

Simply take after our basic guidelines, and make the most of your private garden:

Step 1: Make the base for your tower

Remove the base of a soda bottle, however ensure you safeguard a portion of the bottom curve, so the bottles “settle” together well. Dispose of the base.


Pierce two drainage openings on the inverse sides of the container, ideally three inches off the top. Use scissors. Make sure that, you need small holes.

Put your potting blend, fertilizer or garden soil, and press gently. Try not to fill your container to the top, leave an inch of free space.

Secure the base of your vertical tower onto a fence or wires.

Step 2: Build your tower

Do likewise with your different bottles. Remove the cap too.


Fill the bottle with soil, and once more, leave an inch of free space.


Settle the container onto the base, and secure it.

Repeat this with 1-3 bottles.

Step 3:It’s time to “build” the drip-irrigation system

Cut a soda bottle in half down the middle, ideally a halfway to the top. This will be your watering pipe.


Put it on top of your vertical tower, and “nest” it firmly in the dirt.


Cut the bottom of your last bottle, and now you have your watering bottle.

Make a 1 mm opening in the top.


Put your watering bottle onto the channel.


Step 4: It’s planting time!

Draw a square onto every bottle, and cut the top and the sides of your 2-inch square. The uncut base side will help you hold the soil in.

Poke a gap, and plant your seeds or seedling. Fill your watering bottle regularly.

Your vertical planting tower is prepared!


If you require a couple of thoughts on what to plant, check our recommendations:




Dandelion greens (taraxacum)














If your watering bottle doesn’t drip, it might be clogged. You may likewise need to check the drainage gap in its top. Add some sand to the watering container to moderate the dripping. This will give a steady and effective watering. Decent!

Here’s the rundown of thing you need for your vertical planting towel:

(at least 5) 2-liter pop containers

Box cutter/Knife


Twine/Baling wire (3 feet)

Steel fence/Wire outline/Other supporting structure

3 seedlings/Seeds for your plants


  • Marie


    As a healthy person committed to food as the one of the most important sources of energy, I started writing on as a freelance health writer, sharing my advice and experience, as well as food and drinks that helped me move towards a complete health-oriented world.

  • Show Comments

Your email address will not be published. Required fields are marked *

comment *

  • name *

  • email *

  • website *